Polymers

Choose a method

All

All

Differential Scanning Calorimetry

Differential Scanning Calorimetry

Knowledge Compact – The Handbook DSC on Polymers – Essential for the Analysis of Plastics, Rubber or Resins

The handbook DSC on Polymers provides you quickly and competently with helpful tips to enable you to carry out measurements on thermoplastics, elastomers, thermoplastic elastomers or thermosets and interpret the results. For 64 polymers, we have compiled measuring plots, measurement parameters, interpretation of the results and general material properties. Also chemical structures (if available), processing possibilities and application ranges, all of which are presented in a clearly structured and practice-oriented overview.  

The introductory chapters offer an easy-to-understand introduction to DSC (including special measuring techniques such as temperature-modulated DSC, OIT, specific heat), lists national and international standards important for DSC measurements and describe their recommendations for the evaluation of polymer measurements.   The DSC handbook is available in German and English. Reserve your personal copy today.

Application literature

Investigation of different LDPE LLDPE and HDPE blends with DSC and DMA regarding the performance in terms of morphology and mobility of the amorphous phase

published: Polymer Degradation and Stability 93 (2008) 43

Application literature

Optimization of the temperature profile for curing of a epoxy-based resin by means of DSC data and kinetic analysis using mulitariate non-linear regression

published: NETZSCH-Gerätebau GmbH

Application literature

Determination of melting behavior, crystallinity and thermal stability of polyolefines by means of DSC

published: Kunststoffe 10/2008

Application literature

Determination of the degree of crystallinity of specific grades of polyolefines by means of DMA, DSC WAXS and density

published: J. Polym. Res. 15 (2008) 83

The phase transition of PTFE was studied using DSC, DIL, DMA and Laser flash techniques

Application literature

Oxidative-induction time (OIT) measurements allow for characterization of the long-term stability of hydrocarbons. For determination of the oxidative stability, standardized test methods by means of DSC (Differential Scanning Calorimetry) are used. OIT tests by means of DSC are internationally recognized. Well-established standards are e.g., ASTM D3895-92, ASTM D6186, EN 728 und ISO 11357-6.

Application literature

Thermogravimetric Analysis

Thermogravimetric Analysis

Application literature

Investigation of thermal stability of polymers as well as stabilizer decomposition and aging of resins by means of TG

published: Kunststoffe international 10/2007 255

Application literature

Determination of the calcium carbonate (CaCO3) content of Crustacea

published: NETZSCH Onset 4/2008

Application literature

Approach to assess the degree of cure of amino adhesive systems in the penal bord production by means of DSC data and thermokinetc software

published: 8th European Panel Products Symposium


Thermal Diffusivity & Conductivity

Thermal Diffusivity & Conductivity

Application literature

Basic theories and applications of different techniques for thermal diffusivity and thermal conductivity

 

published: Ceramic Industry, June (2002) 53

Application literature

Introduction of a new sample container for measurement of thermophysical properties such as thermal diffusivity on liquids, pastes and molten polymers

published: Thermochim. Acta, 455 (2007) 26

Application literature

Determinatioon of thermal conductivity and calculation of thermal diffusivity of copper fibre reinforced polypropylene (PP)

published: NETZSCH-Gerätebau GmbH

Application literature

Dermination of thermal diffusivity of liquids, pastes and polymers by means of the laser flash technique

published: High Temperatures - High Pressures, 35/36 (2003/2007) 627

Application literature

Determinatioon of thermal conductivity and calculation of thermal diffusivity of amorphous Polycarbonat (PC) and copper fibre reinforced polypropylene (PP)

published: Kunststoffe plast europe 10 (2004) 1

The phase transition of PTFE was studied using DSC, DIL, DMA and Laser flash techniques


Evolved Gas Analysis

Evolved Gas Analysis

Application literature

Characterization of Dust Samples in Occupational and Environmental Medicine

published: NETZSCH Onset 4/2008


Dielectric Analysis

Dielectric Analysis

Application literature

Photopolymerization kinetics of UV curable coating systems have been studied by real-time infrared spectroscopy (RT-FTIR) and in situ dielectric analysis (DEA)

published: European Coatings Journal, 11 (2003) 18

Application literature

Correlation of rheology with DEA for an carbon fiber-reinforced epoxy resin

published: NETZSCH-Gerätebau GmbH

Application literature

Optimized paint curing by means of dielectric and kinetik analysis

published: Farbe & Lack, 109 (2003)

Application literature

Reaction of light curing dental resins investigated by means of DEA

published in: Journal of Materials Science (2006)

Application literature

The curing behavior of a clear coat, powder paint and liquid acrylic paint is studied by means of DEA

published: paint & coatings industry, september (2005) 26


Dynamic Mechanical Thermal Analysis

Dynamic Mechanical Thermal Analysis

Application literature

Determination of the degree of crystallinity of specific grades of polyolefines by means of DMA, DSC WAXS and density

published: J. Polym. Res. 15 (2008) 83

The phase transition of PTFE was studied using DSC, DIL, DMA and Laser flash techniques


Simultaneous Thermal Analysis (DSC-TGA)

Simultaneous Thermal Analysis (DSC-TGA)

Application literature

Determination of the calcium carbonate (CaCO3) content of Crustacea

published: NETZSCH Onset 4/2008

Application literature

Approach to assess the degree of cure of amino adhesive systems in the penal bord production by means of DSC data and thermokinetc software

published: 8th European Panel Products Symposium


Dilatometry

Dilatometry

Application literature

Investigation of different LDPE LLDPE and HDPE blends with DSC and DMA regarding the performance in terms of morphology and mobility of the amorphous phase

published: Polymer Degradation and Stability 93 (2008) 43

The phase transition of PTFE was studied using DSC, DIL, DMA and Laser flash techniques